Integrated Circuit

UL1577, 4,170 VACRMS for 1 Minute; • Excellent IFT Stability - IR Emitting Diode Has Low Degradation• Peak Blocking Voltage; 400 V - MOC302XM• Safety and Regulatory Approvals; DIN EN/IEC60747-5-5); 250 V - MOC301XM

ROHS COMPLIANT PACKAGE-4

Easy-to-Use 16-Bit ADC with SPI DFN6 LTC2450IDC#TRMPBF, 16 bit ADC SPI, 6-Pin DFN

MAXIM INTEGRATED PRODUCTS - MAX6160EUS+T - Voltage Reference Series - Adjustable, 1.23V to 12.4V reference, ? 15ppm/?C, SOT-143-4

SOP-8

Use the download button to access the CHY100D-TL schematic symbol, PCB footprint, and 3D model.

CHY100D is an Power Integrations Electronic Component for industrial controls, embedded electronics, maintenance builds. Key specs include 8 pins and Small Outline Packages. From $ price in stock worldwide shipping.

Semikron SKYPER 32 R Dual IGBT Gate Driver,, 15A, 14.4 → 15.6 V

Transceiver RS-485 3.3V 10Mbps SOIC8 EXAR SP3485CN-L, Line Transceiver, RS-422, RS-485, 3.3 V, 8-Pin SOIC

LEAD FREE, PLASTIC, SOIC-8

Transceiver RS-485 3.3V 10Mbps SOIC8 SP3485EN-L, Line Transceiver, RS-485, RS-422 10Mbit/s Differential, 3.3 V, 8-Pin SOIC

Sensor-less BLDC fan motor driver,SSOP30 LB11696V-TLM-E, Motor Driver, Brushless Motor Driver, 22kHz 4.5 → 5.5 V, 8 → 17 V, 30-Pin SSOP 30

ZXGD3003E6TA is a Diodes Inc. Diode for rectification, reverse-polarity protection, clamping. Key specs include 6 PIN, 6-Pin, 12 W, 1 Output and SOT-23. From $ price in stock worldwide shipping.

Phase Locked Loops - PLL Encoder

Phase Locked Loops - PLL Decoder

SOT-23,3PIN

SO-8

Very Low Noise at 39 uVrms without a Bypass Capacitor; Fast enable response (20 usec); High Ripple Rejection of 70 dB at 1 kHz; Can use decoupling capacitors with ESR ranging from milliohms to 3 ohms.

300mA 3.3V RF ULDO Regulator SOT23-5 AP2210K-3.3TRG1, Low Noise LDO Voltage Regulator, 300mA, 3.3 V ??2%, 2.5 ??? 13.2 Vin, 5-Pin SOT-23-5

SOT-223, 3PIN

3.3V 1A Pos LDO Regulator SOT-223 DiodesZetex AZ1117H-3.3TRE1, LDO Voltage Regulator, 1A, 3.3 V 1%, maximum of 15 Vin, 3+Tab-Pin SOT-223

1.35A Adj. LDO Reg. Current Limit SOT223 DiodesZetex AZ1117CH-ADJTRG1, LDO Voltage Regulator, Adjustable 800mA, 1.25 V ±1%, maximum of 15 Vin, 3 + Tab-Pin

1.35A 3.3V LDO Reg. Current Limit SOT223 DiodesZetex AZ1117CH-3.3TRG1, LDO Voltage Regulator, 0.8A, 3.3 V ±1%, maximum of 15 Vin, 3-Pin SOT-223

ROHS COMPLIANT, SOIC-8

600mA 3.3V LDO Regulator Enable SOT23-5 DiodesZetex AP2112K-3.3TRG1, LDO Voltage Regulator, 3.3 V ±1.5%, 2.5 → 6 Vin, 5-Pin SOT-23

DiodesZetex AZ1117CR-3.3TRG1, LDO Regulator, 800mA, 3.3 V, ±1%, maximum of 15 Vin 3-Pin, SOT-89

SOIC-8

74AHC(T)1G14 - Inverting Schmitt trigger@en-us

SOT-23, 5 PIN

ZXMHC10A07T8TA is a Diodes Inc. Diode for rectification, voltage clamping, and circuit protection. It combines 8 pins, 8 PIN, and Small Outline Packages package, 8-pin layout for practical design qualification. From request-a-quote sourcing, FindMyChip supports stock checks and worldwide shipping.

71M6511-IGT/F from Maxim Integrated is a integrated Circuit. Key specs include 64 pins. From inquiry pricing, buyers can request stock with worldwide shipping. Suitable for production sourcing and approved vendor list reviews.

TC62D748CFNAG(CEBH from Toshiba is a integrated circuit for industrial controls, embedded electronics, maintenance sourcing, and production assemblies. Key specifications include 17V, 24 pins, Small Outline Packages package/footprint, supporting reliable selection for OEM maintenance, prototyping, and production BOMs. The Small Outline Packages format supports standard assembly and sourcing workflows.

PLASTIC PACKAGE-2

The RX62T Group of high-performance microcontrollers with a maximum operating frequency of 100MHz are designed for motor control. They are equipped with multifunction timers (MTU, GPT), high-speed 12-bit A/D converter, and 10-bit A/D converter for facilitating motor control. The products also incorporate many safety features to comply with the IEC60730 safety standard for home appliances. In addition to a maximum of 256KB flash and 16KB RAM on-chip memory, they have a maximum of 32KB of on-chip flash memory

TC62D748CFG is a Toshiba 16-output constant-current LED display driver. It uses serial data input, Schmitt trigger inputs, and a 24-pin PDSO package. From inquiry stock with worldwide shipping support.

Fully GSM Compliant; 100% compatible with ISO 7816-3, EMV and GIE-CB standards; Wide battery supply voltage range : 2.7 < Vcc < 5.5V; Programmable CRD_VCC supply handles 1.8V, 3V or 5V card operation.; Programmable rise and fall card clock slopes; Programmable card clock divider; Built-in Chip Select logic allows parallel coupling operation; ESD protection on card pins ( 8 kV, Human Body Model ); Supports up to 40 MHz input Clock ; Built-in programmable CRD_CLK stop function handles Run or Low state.; Progr

The 74FCT3245 octal high-speed, low-power transceiver is ideal for asynchronous communication between two buses. The direction control pin (DIR) controls the direction of data flow. The output enable pin (OE) overrides the direction control and disables both ports. The 74FCT3245 has series current limiting resistors that offer low ground bounce, minimal undershoot, and controlled output fall times reducing the need for external series terminating resistors. The 74FCT3245 operates at -40C to +85C

The 74FCT3245 octal high-speed, low-power transceiver is ideal for asynchronous communication between two buses. The direction control pin (DIR) controls the direction of data flow. The output enable pin (OE) overrides the direction control and disables both ports. The 74FCT3245 has series current limiting resistors that offer low ground bounce, minimal undershoot, and controlled output fall times reducing the need for external series terminating resistors. The 74FCT3245 operates at -40C to +85C

The 74FCT3245 octal high-speed, low-power transceiver is ideal for asynchronous communication between two buses. The direction control pin (DIR) controls the direction of data flow. The output enable pin (OE) overrides the direction control and disables both ports. The 74FCT3245 has series current limiting resistors that offer low ground bounce, minimal undershoot, and controlled output fall times reducing the need for external series terminating resistors. The 74FCT3245 operates at -40C to +85C

The 74FCT3245 octal high-speed, low-power transceiver is ideal for asynchronous communication between two buses. The direction control pin (DIR) controls the direction of data flow. The output enable pin (OE) overrides the direction control and disables both ports. The 74FCT3245 has series current limiting resistors that offer low ground bounce, minimal undershoot, and controlled output fall times reducing the need for external series terminating resistors. The 74FCT3245 operates at -40C to +85C

The 74FCT3245 octal high-speed, low-power transceiver is ideal for asynchronous communication between two buses. The direction control pin (DIR) controls the direction of data flow. The output enable pin (OE) overrides the direction control and disables both ports. The 74FCT3245 has series current limiting resistors that offer low ground bounce, minimal undershoot, and controlled output fall times reducing the need for external series terminating resistors. The 74FCT3245 operates at -40C to +85C

The 74FCT3245 octal high-speed, low-power transceiver is ideal for asynchronous communication between two buses. The direction control pin (DIR) controls the direction of data flow. The output enable pin (OE) overrides the direction control and disables both ports. The 74FCT3245 has series current limiting resistors that offer low ground bounce, minimal undershoot, and controlled output fall times reducing the need for external series terminating resistors. The 74FCT3245 operates at -40C to +85C

The 74FCT3245 octal high-speed, low-power transceiver is ideal for asynchronous communication between two buses. The direction control pin (DIR) controls the direction of data flow. The output enable pin (OE) overrides the direction control and disables both ports. The 74FCT3245 has series current limiting resistors that offer low ground bounce, minimal undershoot, and controlled output fall times reducing the need for external series terminating resistors. The 74FCT3245 operates at -40C to +85C

QFN-68

CY8C42xx Family

The 74FCT3245 octal high-speed, low-power transceiver is ideal for asynchronous communication between two buses. The direction control pin (DIR) controls the direction of data flow. The output enable pin (OE) overrides the direction control and disables both ports. The 74FCT3245 has series current limiting resistors that offer low ground bounce, minimal undershoot, and controlled output fall times reducing the need for external series terminating resistors. The 74FCT3245 operates at -40C to +85C

PSoC 42xxM

TQFP-64

WLCSP-35

TQFP-64