Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 60,651–60,700 of 77,666
Use the download button to access the TLIN1029DQ1 schematic symbol, PCB footprint, and 3D model.
1-mA, 300-MHz Gain Bandwidth, Voltage-Feedback Op Amp
Switching Voltage Regulators 3-A Boost Converter with 0.5-V Ultra Low Input Voltage 8-WSON -40 to 85
The ISO7761DBQR is a 6-channel digital isolator from Texas Instruments with a 6/1 channel direction split, providing galvanic isolation for mixed-direction signal transmission across high-voltage barriers. It operates from 2.25V to 5.5V on both sides and supports data rates up to 100 Mbps per channel. Housed in a 16-pin SSOP package, it suits industrial motor drives, solar inverters, and isolated fieldbus interfaces.
SOIC-16
SSOP-16
+3.3V Rising Edge Data Strobe LVDS 21-Bit Channel Link - 66 MHz
1.5-A USB-Friendly Li-Ion Battery Charger and Power-Path Management IC
Analog Comparators Nanopower 1.8V Push-Pull
27V Flat-Clamp Surge Protection Device
VQFN-24
20W Digital Input Smart Amp with I/V Sense for Speaker Protection and 4.5-18V Supply Voltage Range
Automotive 3A High-Accuracy Low-Noise Low-Dropout (LDO) Voltage Regulator
Texas Instruments TPS7A5401QRGRRQ1 is an automotive-grade 4 A adjustable LDO voltage regulator with 150 mV typical dropout, 1.1 V to 6.5 V input range, and ±0.5% output accuracy in a 20-VQFN package. AEC-Q100 qualified for -40 °C to +150 °C operation. Available from stock with worldwide shipping.
The Texas Instruments TVS1400DRVR is a 14 V flat-clamp transient voltage suppressor surge protection device with a silicon diode and clamping voltage up to 18.4 V in a small outline no-lead package. It provides single-channel complex protection against ESD and surge transients. Available from stock worldwide with fast shipping.
Automotive 2A High-Accuracy Low-Noise Low-Dropout (LDO) Voltage Regulator
Automotive 300-mA high-voltage ultra-low-IQ low-dropout (LDO) linear regulator
200mA Low-Iq Low-Noise Low-Dropout (LDO) Regulator in Ultra-Small 0.8mm x 0.8mm WCSP
Texas Instruments 74LVC1G126DCKTE4 is a single-gate non-inverting 3-state bus buffer in a compact SC70-5 package, LVC family, with active-high enable control for 1.65 V to 5.5 V level translation. Available in stock worldwide with fast shipping.
OPAx375, 500uV, 10-MHz, Low Broadband Noise, RRO, Operational Amplifier
Single Buffer/Driver With Open-Drain Output
Piccolo™ 32-bit MCU with 100 MHz, FPU, TMU, 256 KB Flash, CLA, PGAs, SDFM
Switching Voltage Regulators SIMPLE SWITCHER Power Converter 150 kHz 0.5A Step-Down Voltage Regulator 8-SOIC
Use the download button to access the DAC60508ZRTET schematic symbol, PCB footprint, and 3D model.
SIMPLE SWITCHER® 3.8V to 36V, 3A Synchronous Buck Converter With Ultra-Low EMI
Texas Instruments TMS320F28377DPTPEP is a 32-bit C2000 DSP microcontroller running at up to 200 MHz with dual-core architecture, integrated ADC, DAC, and 21-bit address bus in a QFP package. Designed for high-performance real-time control in power conversion and motor drive systems. Available from stock with worldwide shipping.
Texas Instruments LM5023MMX-2/NOPB is an AC-DC quasi-resonant current-mode PWM controller operating from 8 V to 14 V input, designed for flyback and forward converters in an 8-pin SOIC package, available with worldwide shipping.
LDO Voltage Regulators Sgl Output LDO 150 mA Fixed(3.0V)
LM4040A10IDCKRG4 is a precision 10 V shunt voltage reference from Texas Instruments with ±0.1% initial accuracy and two-terminal operation, available in a compact 5-pin SC-70 package.
2.4V-5.5V input, 1A step-down converter With 1% Accuracy in 1.5x2mm QFN
Use the download button to access the TMP235A2DCKR schematic symbol, PCB footprint, and 3D model.
Use the download button to access the ISOW7840FDWE schematic symbol, PCB footprint, and 3D model.
The TLV6741DCKT is a 10 MHz, low-power, low-noise rail-to-rail output operational amplifier from Texas Instruments, featuring 95 dB minimum CMRR and a maximum input offset voltage of 1000 µV in a 5-pin SOT-23 package. It delivers precision signal conditioning in space-constrained designs. Available from stock worldwide with competitive pricing and fast shipping.
SSOP-16
80V, Low-/High-Side, Bi-Directional, Zero-Drift, Current Sense Amp w/Enhanced PWM Rejection
Operational Amplifiers - Op Amps 1MHz 45uA RRIO Single Op Amp
SOIC-8
SSOP-16
Inverters AutoCat Hex Schmitt Trigger Inverter
SSOP-16
5V Flat-Clamp Surge Protection Device
Oscillator XO 156.25MHz ±50ppm LVPECL 55% 3.3V Medical 8-Pin QFM SMD T/R
Use the download button to access the PTHVD1450D schematic symbol, PCB footprint, and 3D model.
Single Schmitt-Trigger Inverter Gate
80V, Low-/High-Side, Bi-Directional, Zero-Drift, Current Sense Amp w/Enhanced PWM Rejection
Texas Instruments TS5A4624DCKRG4 is a single-channel SPDT analog switch with 90 MHz bandwidth and 63 dB off-state isolation, supporting signals up to 6.5 V. It routes analog or digital signals in a miniature 6-pin SOT-23 surface-mount package. Available from stock with worldwide shipping.
Single Output LDO, 1A, Adj. (1.2 to 5.0V), Reverse Current Protection
Use the download button to access the INA828ID schematic symbol, PCB footprint, and 3D model.
High-Frequency Multi-Mode Synchronous Rectifier Controller
80V, Low-/High-Side, Bi-Directional, Zero-Drift, Current Sense Amp w/Enhanced PWM Rejection
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote