Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 58,151–58,200 of 77,666
High Speed Operational Amplifiers OPA830: Low-Power Sngl-Sply Oper Amp
Low Power, Wideband, Voltage Feedback Operational Amplifier with Disable
Power Switch ICs - Power Distribution 0.7A 2.7-5.5V Dual Hi Side MOSFET Sw IC
Texas Instruments OPA830IDG4 is a low-power, single-supply voltage-feedback operational amplifier with 80dB typical CMRR and 73dB minimum CMRR. Features frequency compensation and 8-pin SOIC package. Available from stock worldwide with fast shipping.
Analog Comparators High speed, low voltage push-pull comparator 5-SOT-23 -40 to 85
Texas Instruments SN74LS125ADE4 is a quad bus buffer with 3-state outputs from the LS logic family, featuring four independent 1-bit unidirectional drivers with active-low output enable controls and 24 mA output low drive in a 14-pin SOIC package. Each buffer gate tristates its output when the enable input is high, allowing multiple devices to share a common data bus without contention. This device is widely used in microprocessor address and data buses, memory interface circuits, and general-purpose digital bus buffering in industrial, consumer, and legacy embedded systems.
LDO Voltage Regulators Ultra Low-Power 100-mA LDO
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 2-Element 48-Pin TSSOP T/R
IC GATE NAND 4CH 2-INP 14DIP
Linear Charge Management Li-Ion/Li-Pol 2000mA 4.2V 8-Pin SOIC Tube
SOP-8
Texas Instruments TPS2105DG4 is a dual-input, single-output MOSFET power switch operating from 2.7 V to 5.5 V, providing automatic source selection and load protection in an SOP-8 package. From $1.20 in stock worldwide shipping.
Texas Instruments REG1117-2.85G4, LDO Voltage Regulator, 800mA, 2.85 V ±1%, 3.8 → 15 Vin, 4-Pin SOT-223
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 2-Element 48-Pin SSOP Tube
IC OPAMP VFB 110MHZ SOT23-5
PMIC for E-Ink® Vizplex™ Enabled Electronic Paper Display w/ Active Discharge
Counter Single 12-Bit Binary UP 16-Pin SOIC Tube
Switching Controllers
Dual 1-of-4 FET Mult/Demult 2.5-V/3.3-V Low-Voltage Bus Switch with 5-V Tolerant Level Shifter
LDO Voltage Regulators Ultra Low-Power 50-mA LDO
70-V Fault-Protected RS-485 Transceivers Full-Duplex with -20 to +25 common mode
The TPS77050DBVTG4 is an ultra-low-power 50mA fixed-output LDO linear voltage regulator from Texas Instruments. It features a nominal dropout voltage of just 35mV, input range of 5.235V to 10V, and line regulation of 0.02% in a 5-pin SOT-23 package. Available with worldwide shipping at competitive pricing.
LDO Voltage Regulators Ultra Low-Power 50-mA LDO
Latches Octal DTYPE Transparent Latches
Use the download button to access the TPS2042ADR schematic symbol, PCB footprint, and 3D model.
Flip Flop D-Type Pos-Edge 1-Element 8-Pin VSSOP T/R
The TPS650243RHBRG4 is an integrated power management IC from Texas Instruments designed for lithium-ion powered systems, combining two DC-DC converter channels with adjustable thresholds. It integrates charging, regulation, and supervisory functions in a 32-pin QFN package. Targeted at smartphones, tablets, and other portable consumer electronics requiring comprehensive power management.
Automotive, High Speed, Robust EMC Quad-Channel Digital Isolators
ToF-Based Long-Range Proximity and Distance Sensor Analog Front End (AFE)
High-accuracy digital temperature sensor with ±0.1°C precision and integrated non-volatile memory in a compact SOT-23 package. Features I2C/SMBus interface with programmable alerts and operates from 1.7V to 5.5V supply. From $2.00 in stock worldwide shipping.
TPS7A5201WQRTKRQ1 is an AEC-Q100 automotive-grade 2 A low-dropout linear regulator with a typical dropout of only 95 mV and ±1% accuracy across temperature. It accepts inputs from 1.1 V to 6.5 V and operates from -40 °C to 125 °C. Available from stock worldwide with fast shipping.
Operational Amplifiers - Op Amps Quadruple Oper Amplifier
Latches Octal Transparent
Latches Octal DTYPE Transparent Latches
16-Bit Edge-Triggered D-Type Flip-Flop With 3-State Outputs
IC LI-ION LDO CHRG MGMT 8VSSOP
The REG1117A-1.8G4 is a fixed 1.8V, 1A low-dropout linear voltage regulator from Texas Instruments in a 4-pin SOT-223 package. It delivers up to 1A output current with a maximum dropout voltage of 1.55V and input voltage range of 3.8V to 15V. Available from authorized distributors with fast worldwide shipping.
Use the download button to access the TPS2012D schematic symbol, PCB footprint, and 3D model.
Texas Instruments TLC2272AMDG4 is a dual rail-to-rail output op-amp with 0.8 nA maximum bias current and 70 dB CMRR in an SOIC-8 package. Designed for single-supply signal conditioning, it delivers precision amplification from 2.7V to 16V supply voltage.
Flip Flops Dual J K NEG Edge Triggered FlipFlop
I2C Logic Buffer 2.5V/3.3V/5V/9V/12V 8-Pin VSSOP T/R
High Performance Low Cost Rail-to-Rail Input/Output HV FET Op Amps
Lithium-ion Protection IC Family Offering Accurate Cell-by-cell V Monitoring
CMOS dual complementary pair plus inverter
Quadruple Differential Line Driver
Texas Instruments LM3302DRE4 is a quad differential comparator with 4 independent open-collector outputs in a 14-pin SOIC package. It operates from a single supply and delivers 20 mV maximum input offset voltage, suited for multi-channel threshold detection in automotive and industrial systems.
The TPS76915DBVTG4 is an ultra low-power 100mA fixed-output LDO voltage regulator from Texas Instruments in a compact SOT-23-5 package. Key specs: 1.5V fixed output, 2.7V to 10V input range, 1.2V dropout voltage. Available in stock with worldwide shipping.
SOT-23, 5 PIN
Driver 0.5A 2-OUT High Speed Inv 8-Pin SOP T/R
Dual MOSFET Drivers
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote