Integrated Circuit

The LM7171AIN is a high-speed voltage-feedback operational amplifier from Texas Instruments in an 8-pin DIP package. It delivers 200 V/µs slew rate with 1.5 mV maximum input offset voltage and 104 dB typical CMRR, operating with unity-gain stable design for minimum closed-loop gain of 2. Suitable for video and imaging signal chains.

Inverter 6-Element CMOS 14-Pin SOIC T/R

VQCCN,

Supervisory Circuits Battery-Backup for RAM Retention

The TPS3619-50DGKG4 is a single-channel battery-backup supervisory circuit from Texas Instruments with a 5.0 V threshold for RAM retention. It includes manual reset and operates in an 8-pin TSSOP package. RoHS e4 compliant, available in stock with worldwide shipping.

The TPS65100PWPRG4 is a quad output LCD power supply IC for TFT displays, integrating boost, SEPIC, and inverting converters. It operates from 2.7 V to 5.8 V input and provides regulated positive and negative voltages for LCD bias. Available in a compact 24-pin HTSSOP package with worldwide in-stock supply.

Flip Flop D-Type Pos-Edge 2-Element 14-Pin SOIC T/R

Automotive 2.25-MHz Fixed VOUT Dual 800mA Step-Down Converter for ADAS Camera applications

Voltage References Precision Micropower Shunt Vltg Ref

Low-Power, RRIO, 750-uV Offset, 1-MHz Operational Amplifier for Cost-Sensitive Systems

Octal Buffer/Driver With 3-State Outputs

Operational Amplifiers - Op Amps Advanced LinCMOS Rail-To-Rail Dual

Logic Gates Quadruple 2-Input Positive-NAND gates

The CD4070BNSRG4 is a quad 2-input XOR gate IC from Texas Instruments in the 4000B CMOS series, packaged in a 14-pin SOP with tape-and-reel (NSR) packaging. It operates over a wide 3V to 15V supply range, provides four independent XOR gates with 50 pF load drive, and features PLASTIC/EPOXY construction. Ideal for parity generation, comparators, and logic level conversion circuits.

The CD4070BF is a quad 2-input XOR (exclusive-OR) gate from Texas Instruments in the CMOS 4000-series logic family. It contains four independent XOR gates operating from 3V to 18V supply with a 50pF load capacitance rating. Available in a 14-pin ceramic DIP package, in stock with worldwide shipping.

The CD54HC365F3A is a 6-channel non-inverting tri-state buffer and line driver from Texas Instruments with dual active-low output enables, housed in a 16-pin ceramic DIP package for high-reliability applications. It operates in the HC/UH high-speed CMOS logic family with 50 pF load capacitance for robust bus driving in military and industrial environments. Available in stock worldwide for data bus buffering and signal isolation applications.

The CD54HCT365F3A is a military-grade hex non-inverting bus driver with dual output enable from Texas Instruments in a 16-pin ceramic DIP package. Operating in the HCT CMOS family with TTL-compatible inputs, it supports unidirectional 3-state bus driving from -55°C to 125°C and is QML qualified for space and defense use.

Flip-Flops Hi Spd CMOS LogDual Pos-Edge-Triggered D

Operational Amplifiers - Op Amps Quad Op Amp

Metering Systems on a Chip - SoC

Flip Flop D-Type Pos-Edge 2-Element 14-Pin SOIC T/R

LDO Regulator Pos 1.95V 0.2A 6-Pin WSON EP T/R

3.3-V ABT 16-Bit Transparent D-Type Latches With 3-State Outputs

The CD74ACT541M96E4 is an 8-channel non-inverting 3-state CMOS bus driver from Texas Instruments in a 20-pin SOIC package. It features dual active-low output enable inputs, unidirectional data flow, and 5 V ACT CMOS operation for TTL-compatible bus buffering. Available on tape and reel with RoHS compliance.

The CD74ACT541SM96E4 is an 8-channel non-inverting tri-state buffer and line driver from Texas Instruments, built with ACT CMOS logic for TTL-compatible high-speed bus driving in a 20-pin SSOP package. It features dual active-low output enables for flexible 8-bit bus partitioning and delivers 24 mA output sink current with 50 pF load capacitance. Available in stock worldwide for data bus buffering and signal routing applications.

LM386MM-1

The SN74HC4060DRG4 is a 14-bit binary ripple up-counter with integrated oscillator from Texas Instruments, featuring outputs from 10 accessible stages and operating up to 22 MHz in a 16-pin SOIC package. It includes an on-chip RC/crystal oscillator circuit for standalone clock generation without external timing ICs, making it a compact self-clocked divider solution. Available in stock globally for timing, clock division, and delay circuit applications.

Voltage References Adjustable Precision Shunt Regulator

The LM158AJG is a dual general-purpose operational amplifier from Texas Instruments, featuring a wide supply range of ±16 V or 32 V single supply and 80 dB typical CMRR. It operates with low bias current of 50 nA typical and is housed in an 8-pin ceramic DIP package for reliable long-term use.

Counter Single 14-Bit Binary UP 16-Pin SSOP T/R

The CD74HC4020EE4 is a high-speed CMOS 14-bit binary ripple up-counter from Texas Instruments with 12 accessible output stages and a reset input, housed in a 16-pin PDIP package. It operates in the HC/UH logic family with 50 pF load capacitance, making it suitable for long-cycle frequency division and timing delay circuits. Available in stock globally for embedded timing, clock divider, and event counter applications.

Buffers & Line Drivers LoVltg Hi-Sp Quad Diff Line Driver

Counter ICs 14-Stg ASync Binary Counter & Oscillator

The CD74HC4020EG4 is a high-speed CMOS 14-stage binary ripple counter from Texas Instruments in a through-hole 16-pin DIP package. It counts up to 2^14 (16384) states with outputs available from 12 counter stages, operates from 2V to 6V supply, and features an active-high master reset. Suitable for frequency division and timer applications in industrial and consumer electronics.

The TPS3305-18DG4 is a dual supervisory circuit from Texas Instruments featuring active-high and active-low reset outputs, monitoring two supply voltages with a fixed 2.93V reset threshold. It accepts input voltages from 2.7V to 6V and is housed in a compact SOIC-8 package, making it ideal for embedded systems requiring reliable power sequencing and reset management.

The CD74HC4020M96G4 is a high-speed CMOS 14-stage binary ripple counter from Texas Instruments with outputs available from 12 of the 14 counter stages. It operates up to 20 MHz and features active-high direct clear input with synchronous reset. Supplied in a 16-pin SOP package on large-reel tape-and-reel packaging for high-volume SMT assembly.

Operational Amplifiers - Op Amps 550-uA/Ch 3-MHz R-to-R Otpt Oper Amp

Use the download button to access the SE555JGB schematic symbol, PCB footprint, and 3D model.

Interface - I/O Expanders Rem 8B I2C & SMBus Lo-Pwr I/O Expander

CD4017BPWRG4 is a CMOS decade counter/divider IC with 10 decoded outputs, featuring Johnson counter topology with clock input up to 2.5 MHz. Packaged in 16-pin TSSOP, it operates from 3V to 15V supply voltage and suits frequency division, LED sequencing, and timing circuit applications. Available from authorized distributors with worldwide shipping.

The CD4029BNSRE4 is a CMOS Presettable Up/Down Binary/BCD Counter IC from Texas Instruments. It supports bidirectional counting with preset load input, operates at up to 2 MHz, and is housed in a 16-pin SOIC package with RoHS-compliant e4 solder rating. Available from stock worldwide with fast shipping.

Switching Voltage Regulators Lo-In Voltage 3A Sync Buck Converter

Processor Supervisor 2.93V/1.68V 1.8V/3.3V 8-Pin HVSSOP EP Tube

Texas Instruments TPA2000D2PWRG4 is a stereo filter-free Class-D audio amplifier IC delivering 2W per channel with 0.1% THD. Features 23.5dB gain, 20kHz bandwidth, and 2-channel output in a compact 24-pin SOIC package. Available from stock with worldwide shipping.

Audio Amp Speaker 2-CH Stereo 2W Class-D 24-Pin TSSOP Tube

3-Series to 5-Series Stackable Ultra-Low-Power Primary Protector With Autonomous Cell Balancing

The PINA821ID is a precision instrumentation amplifier from Texas Instruments with an ultra-low 35 µV offset voltage and only 7 nV/√Hz input-referred noise, designed for accurate signal acquisition from bridge sensors and transducers. It delivers low-power operation with high CMRR and wide bandwidth suitable for industrial measurement and medical instrumentation. Available in small outline package with worldwide distribution.

The TPS799195DRVRG4 is a fixed 1.3V output, 200 mA low-dropout (LDO) linear voltage regulator from Texas Instruments with ultralow 100 mV typical dropout voltage. It operates from 2.7V to 6.5V input and provides excellent line regulation of 0.001482%. Available in a compact 6-pin no-lead SOT package for low-noise power supply designs in communications and computing systems.

Use the download button to access the SN74LV244ADBRG4 schematic symbol, PCB footprint, and 3D model.

The TPS799195DRVTG4 is a 200 mA fixed 1.95 V output LDO linear voltage regulator from Texas Instruments with a typical dropout voltage of only 100 mV and input range of 2.7 V to 6.5 V in a compact 6-pin SON package. It delivers excellent line regulation of 0.00148% and is optimized for low-noise, high-PSRR power supply rails in portable and wireless applications. Available from stock with competitive pricing and worldwide shipping.