Integrated Circuit

600mA 3.3V LDO Regulator Enable SOT23-5 DiodesZetex AP2112K-3.3TRG1, LDO Voltage Regulator, 3.3 V ±1.5%, 2.5 → 6 Vin, 5-Pin SOT-23

DiodesZetex AZ1117CR-3.3TRG1, LDO Regulator, 800mA, 3.3 V, ±1%, maximum of 15 Vin 3-Pin, SOT-89

SOIC-8

74AHC(T)1G14 - Inverting Schmitt trigger@en-us

SOT-23, 5 PIN

ZXMHC10A07T8TA is a Diodes Inc. Diode for rectification, voltage clamping, and circuit protection. It combines 8 pins, 8 PIN, and Small Outline Packages package, 8-pin layout for practical design qualification. From request-a-quote sourcing, FindMyChip supports stock checks and worldwide shipping.

71M6511-IGT/F from Maxim Integrated is a integrated Circuit. Key specs include 64 pins. From inquiry pricing, buyers can request stock with worldwide shipping. Suitable for production sourcing and approved vendor list reviews.

TC62D748CFNAG(CEBH from Toshiba is a integrated circuit for industrial controls, embedded electronics, maintenance sourcing, and production assemblies. Key specifications include 17V, 24 pins, Small Outline Packages package/footprint, supporting reliable selection for OEM maintenance, prototyping, and production BOMs. The Small Outline Packages format supports standard assembly and sourcing workflows.

PLASTIC PACKAGE-2

The RX62T Group of high-performance microcontrollers with a maximum operating frequency of 100MHz are designed for motor control. They are equipped with multifunction timers (MTU, GPT), high-speed 12-bit A/D converter, and 10-bit A/D converter for facilitating motor control. The products also incorporate many safety features to comply with the IEC60730 safety standard for home appliances. In addition to a maximum of 256KB flash and 16KB RAM on-chip memory, they have a maximum of 32KB of on-chip flash memory

TC62D748CFG is a Toshiba 16-output constant-current LED display driver. It uses serial data input, Schmitt trigger inputs, and a 24-pin PDSO package. From inquiry stock with worldwide shipping support.

Fully GSM Compliant; 100% compatible with ISO 7816-3, EMV and GIE-CB standards; Wide battery supply voltage range : 2.7 < Vcc < 5.5V; Programmable CRD_VCC supply handles 1.8V, 3V or 5V card operation.; Programmable rise and fall card clock slopes; Programmable card clock divider; Built-in Chip Select logic allows parallel coupling operation; ESD protection on card pins ( 8 kV, Human Body Model ); Supports up to 40 MHz input Clock ; Built-in programmable CRD_CLK stop function handles Run or Low state.; Progr

The 74FCT3245 octal high-speed, low-power transceiver is ideal for asynchronous communication between two buses. The direction control pin (DIR) controls the direction of data flow. The output enable pin (OE) overrides the direction control and disables both ports. The 74FCT3245 has series current limiting resistors that offer low ground bounce, minimal undershoot, and controlled output fall times reducing the need for external series terminating resistors. The 74FCT3245 operates at -40C to +85C

The 74FCT3245 octal high-speed, low-power transceiver is ideal for asynchronous communication between two buses. The direction control pin (DIR) controls the direction of data flow. The output enable pin (OE) overrides the direction control and disables both ports. The 74FCT3245 has series current limiting resistors that offer low ground bounce, minimal undershoot, and controlled output fall times reducing the need for external series terminating resistors. The 74FCT3245 operates at -40C to +85C

The 74FCT3245 octal high-speed, low-power transceiver is ideal for asynchronous communication between two buses. The direction control pin (DIR) controls the direction of data flow. The output enable pin (OE) overrides the direction control and disables both ports. The 74FCT3245 has series current limiting resistors that offer low ground bounce, minimal undershoot, and controlled output fall times reducing the need for external series terminating resistors. The 74FCT3245 operates at -40C to +85C

The 74FCT3245 octal high-speed, low-power transceiver is ideal for asynchronous communication between two buses. The direction control pin (DIR) controls the direction of data flow. The output enable pin (OE) overrides the direction control and disables both ports. The 74FCT3245 has series current limiting resistors that offer low ground bounce, minimal undershoot, and controlled output fall times reducing the need for external series terminating resistors. The 74FCT3245 operates at -40C to +85C

The 74FCT3245 octal high-speed, low-power transceiver is ideal for asynchronous communication between two buses. The direction control pin (DIR) controls the direction of data flow. The output enable pin (OE) overrides the direction control and disables both ports. The 74FCT3245 has series current limiting resistors that offer low ground bounce, minimal undershoot, and controlled output fall times reducing the need for external series terminating resistors. The 74FCT3245 operates at -40C to +85C

The 74FCT3245 octal high-speed, low-power transceiver is ideal for asynchronous communication between two buses. The direction control pin (DIR) controls the direction of data flow. The output enable pin (OE) overrides the direction control and disables both ports. The 74FCT3245 has series current limiting resistors that offer low ground bounce, minimal undershoot, and controlled output fall times reducing the need for external series terminating resistors. The 74FCT3245 operates at -40C to +85C

The 74FCT3245 octal high-speed, low-power transceiver is ideal for asynchronous communication between two buses. The direction control pin (DIR) controls the direction of data flow. The output enable pin (OE) overrides the direction control and disables both ports. The 74FCT3245 has series current limiting resistors that offer low ground bounce, minimal undershoot, and controlled output fall times reducing the need for external series terminating resistors. The 74FCT3245 operates at -40C to +85C

QFN-68

CY8C42xx Family

The 74FCT3245 octal high-speed, low-power transceiver is ideal for asynchronous communication between two buses. The direction control pin (DIR) controls the direction of data flow. The output enable pin (OE) overrides the direction control and disables both ports. The 74FCT3245 has series current limiting resistors that offer low ground bounce, minimal undershoot, and controlled output fall times reducing the need for external series terminating resistors. The 74FCT3245 operates at -40C to +85C

PSoC 42xxM

TQFP-64

WLCSP-35

TQFP-64

TQFP-100

TQFP-100

QFN-68

Analog Switch Quad SPST SSOP20 Maxim MAX4545CAP+, Multiplexer Switch IC Quad, SPST, 5 V, 20-Pin SSOP

Monochrome On-Screen Display 1 Channel Maxim MAX7456EUI+, Display Driver, 30-Digits, 5 V, 28-Pin TSSOP

TLD5098EL from Infineon is a integrated circuit for industrial controls, embedded electronics, maintenance sourcing, and production assemblies. Key specifications include 20W, 14 pins, -40°C to 150°C, SSOP-14 package/footprint, supporting reliable selection for OEM maintenance, prototyping, and production BOMs. The SSOP-14 format supports standard assembly and sourcing workflows.

IDT1338-31DCGI from IDT is a Integrated Circuit for industrial controls, embedded electronics, maintenance sourcing, and production assemblies. Key specifications include 8 pins, SOIC package/footprint, supporting reliable selection for OEM maintenance, prototyping, and production BOMs. The SOIC format supports standard assembly and sourcing workflows.

The 1339 serial real-time clock (RTC) is a low-power clock/date device with two programmable time-of-day alarms and a programmable square-wave output. Address and data are transferred serially through an I2C bus. The clock/date provides seconds, minutes, hours, day, date, month, and year information. The date at the end of the month is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with AM/PM indicato

Use the download button to access the PAM8302AADCR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the PAM8302AASCR schematic symbol, PCB footprint, and 3D model.

The 1339 serial real-time clock (RTC) is a low-power clock/date device with two programmable time-of-day alarms and a programmable square-wave output. Address and data are transferred serially through an I2C bus. The clock/date provides seconds, minutes, hours, day, date, month, and year information. The date at the end of the month is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with AM/PM indicato

TSOP-6

2A Bidirectional Buck-Boost DC/DC Regulator and Charger/Balancer

SOP-18

LINEAR TECHNOLOGY - LTC3110EFE#PBF - SUPERCAP CHARGER/BALANCER, 5.5V, TSSOP24

Use the download button to access the LM399H#PBF schematic symbol, PCB footprint, and 3D model.

Maxim DS1245Y-70+ NVRAM, 1Mbit, 70ns, 5V 32-Pin EDIP

12Bit 10Msps Analog to Digital Converter Linear Technology LTC1420CGN#PBF, 12 bit Parallel ADC, Differential Input, 28-Pin SSOP

microSD click mikroBUS

FPGA - Field Programmable Gate Array non-volatile FPGA, 178 I/O, 256FBGA

NXP - 74AHC1G08GW-Q100,1 - LOGIC, AND GATE, SINGLE, 2 I/P, TSSOP-5

SOIC-14

Inverter

RON < 4 Ω Typical; Less Than 0.25 ns-Max Delay Through Switch; Nearly Zero Standby Current; No Circuit Bounce; Control Inputs are TTL/CMOS Compatible; Pin-For-Pin Compatible With QS3257, FST3257, CBT3257; All Popular Packages: QSOP-16, TSSOP-16, SOIC-16; Pb-Free Packages are Available