Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 56,101–56,150 of 77,666
V-Ref Adjustable 2V to 20V 20mA 8-Pin SOIC T/R
Use the download button to access the BQ27531YZFR-G1 schematic symbol, PCB footprint, and 3D model.
Processor Supervisor 4.55V 0V to 5.8V 5-Pin SOT-23 T/R
LED DRVR 96Segment 5V/9V/12V/15V/18V 28-Pin WQFN EP T/R
Use the download button to access the INA190A4IRSWT schematic symbol, PCB footprint, and 3D model.
IC BATTRY BKUP SPRVSOR 14-TSSOP
Power Switch ICs - Power Distribution Autoswitching Power Mux
The Texas Instruments UCC28632DR is a current-mode PWM flyback switching controller operating at up to 120 kHz in a 7-pin SOIC package. It supports both PWM and frequency modulation control techniques with a nominal input voltage of 12V for versatile AC/DC conversion. Available from stock with worldwide shipping.
Audio Amp Headphone 2-CH Stereo 0.07W Class-AB 8-Pin HVSSOP EP Tube
Quad 6V, low-power rail-to-rail input/output op amp
V-Ref Precision 2.5V 20mA 8-Pin SOIC Tube
Texas Instruments SN74AC241NE4 is an 8-channel non-inverting bus driver with 3-state outputs and active-low/high output enable control. Features AC CMOS logic family with 50 pF load capacitance rating in 20-pin PDIP through-hole package. Available from stock worldwide with fast delivery.
Use the download button to access the TMP117AIDRVT schematic symbol, PCB footprint, and 3D model.
High-Performance Ultra-Low Jitter Oscillator
Voltage Supervisor with Programmable Time Delay
Operational Amplifiers - Op Amps Quad Rail-To-Rail Output CMOS Op Amp
Audio Amp Speaker 1-CH Mono/2-CH Stereo 20W Class-D 24-Pin HTSSOP EP T/R
The COP87L88EGN-XE is an 8-bit microcontroller from Texas Instruments based on the COP800 CPU family. It features a maximum clock frequency of 10 MHz, 40-pin DIP package, and is suited for cost-sensitive embedded control applications. Available in stock with worldwide shipping at competitive prices.
SN74LS156DE4 is a dual 2-line to 4-line decoder/demultiplexer from Texas Instruments, built on the LS (Low-power Schottky) TTL process. Each section decodes 2 binary address inputs into 4 mutually exclusive open-collector outputs with independent enable pins, enabling use as a 1-of-8 demultiplexer when both sections are combined. Housed in a 16-pin SOIC package, it suits address decoding, data routing, and bus expansion in digital logic systems.
OPA2727AIDRBRG4 is a 8 pins amplifier by Texas Instruments. Key specs: 8 pins, Small Outline No-lead package, OP Amp Dual GP ±6V/12V 8-Pin VSON EP T/R. From quote-based sourcing, in stock checks support worldwide shipping.
Operational Amplifiers - Op Amps 10MHz, CMOS, Zero-Drift, Zero-Crossover, True RRIO Precision Operational Amplifier 8-VSSOP -40 to 125
Monostable Multivibrator Dual 16-Pin SOIC Tube
Use the download button to access the ISO7631FMDW schematic symbol, PCB footprint, and 3D model.
Counter/Register Single 8-Bit Binary UP 16-Pin SOIC Tube
LDO Voltage Regulators
Use the download button to access the ISO7631FCDW schematic symbol, PCB footprint, and 3D model.
16-bit Microcontrollers - MCU 16B Ultra-Lo-Pwr MCU 2kB FL 128B RAM Comp
LDO Voltage Regulators High PSRR Fast RF High-Enable 250-mA
LDO Voltage Regulators High PSRR Fast RF High-Enable 250-mA
The TPS79433DGNTG4 is a 250 mA fixed 3.3 V low-dropout linear voltage regulator by Texas Instruments in an 8-pin MSOP package. Key specs: 145 mV typical dropout voltage, 3.5 V to 5.5 V input range, 200 mV maximum dropout. Available from stock with worldwide shipping.
16-bit Microcontrollers - MCU 16B Ultra-Lo-Pwr MCU 2kB FL 128B RAM Comp
TEXAS INSTRUMENTS - TSV912AIDGKT - Operational Amplifier, 2 Amplifier, 8 MHz, 4.5 V/µs, 2.5V to 5.5V, VSSOP, 8 Pins
Dual 2-Line to 4-Line Decoders/Demultiplexers with Open-Collector Outputs
The CD74ACT245EE4 is an octal bidirectional bus transceiver with 3-state outputs from Texas Instruments, part of the ACT logic family. It features direction control, 50pF load capacitance handling, and operates in a 20-pin PDIP package. Available as a lead-free, RoHS-compliant component with worldwide distribution.
SN74LS156DRG4 is a dual 2-line to 4-line decoder/demultiplexer with open-collector outputs, operating from 4.75 V to 5.25 V TTL supply, configurable as a 1-to-8 demultiplexer, featuring 8 mA sink current per output and 15 pF load capacity in a 16-pin SOIC package.
Switching Controllers Regulating Pulse Width Modulator
The UC2525BDWG4 is a voltage-mode PWM controller IC from Texas Instruments capable of 400mA output drive current, with an input voltage range of 8V to 35V nominal 20V for use in industrial switching power supplies. Housed in a 16-pin SOIC surface-mount package, it provides full-featured push-pull PWM control for high-power DC-DC converter designs. Available from authorized distributors with worldwide shipping.
Voltage Mode PWM Controller 400mA 400kHz 16-Pin CDIP Tube
16-bit Microcontrollers - MCU 17 MHz Low-Powr 4 KB FRAM, .5 KB SRAM
MCU 16-bit MSP430 RISC 2KB Flash 2.5V/3.3V 16-Pin VQFN EP T/R
Board Mount Temperature Sensors Digital Out Temperature Sensor
The ADS1110A5IDBVRG4 is a single-channel 16-bit delta-sigma ADC with I2C interface sampling at up to 128 sps in a 6-pin SOT-23 package. Available from stock with worldwide shipping.
74AC11257PWG4 is a quad 2-input, 1-output multiplexer from Texas Instruments in the high-speed AC logic family. It features four independent 2-to-1 multiplexer functions with 24 mA output sink current capability. Available in TSSOP-20 package, in stock worldwide with fast shipping.
Texas Instruments CD74ACT283M is a 4-bit binary full adder with fast internal carry lookahead in a 16-pin SOIC package, operating at ACT logic levels with 50 pF load capacitance. Available in stock worldwide with competitive pricing and global shipping.
The SN74LV393ATPWRQ1 is an automotive-grade dual 4-bit binary counter IC from Texas Instruments. It features a maximum operating frequency of 35 MHz with 50 pF load capacitance and operates over the full automotive temperature range. Available in a 16-pin SOIC package with RoHS-compliant, Pb-free construction for reliable in-vehicle applications.
Audio Amp Speaker 1-CH Mono/2-CH Stereo/4-CH Stereo 100W Class-AB 44-Pin HTSSOP EP Tube
RS-232 Interface IC Quadruple Line Receiver 14-TSSOP
Texas Instruments 74CBTLV3257DBQRG4 is a quad 2:1 multiplexer/demultiplexer in the CBTLV logic family, operating from 1.65V to 3.6V. It supports 4 independent channels with 50 pF load capacitance handling and ultra-low channel resistance for high-speed bus switching applications. Available in a 16-pin SSOP package with RoHS-compliant e4 lead-free finish.
USB 2.0 signal conditioner
OR Gate 1-Element 2-IN CMOS 5-Pin SOT-553 T/R
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote