Integrated Circuit

DBV-6

OR Gate 1-Element 2-IN CMOS 5-Pin SC-70 T/R

SN74AHC1G32DCKTE4 is a single 2-input CMOS OR gate from Texas Instruments in the AHC family, operating from 2 V to 5.5 V with 8 mA output drive and 50 pF load capability, packaged in a miniature 5-pin SC-70 for space-constrained digital logic designs.

The CD74ACT374EE4 is an octal D-type positive-edge-triggered flip-flop with 3-state outputs from Texas Instruments. It features ACT CMOS technology operating up to 110MHz, with TTL-compatible inputs and 50pF load capacitance in a 20-pin PDIP package. Designed for high-speed bus interfacing and data latching in digital systems.

Buffer/Line Driver 4-CH Non-Inverting 3-ST BiCMOS Automotive 14-Pin SOIC T/R

Operational Amplifiers - Op Amps Dual General-Purpose Op Amp

Digital to Analog Converters - DAC 10B 275MSPS Dual DAC

The CLC449AJE-TR is a high-speed operational amplifier from Texas Instruments designed for wideband signal processing applications. Key specs: 750 MHz gain-bandwidth product, ±5 V dual-supply operation, and low noise performance in a small outline SOIC package. Available on tape and reel for volume automated assembly.

Use the download button to access the UCC24624DR schematic symbol, PCB footprint, and 3D model.

Texas Instruments TPIC2603NE, General Purpose Driver, 20-Pin, PDIP

Motor / Motion / Ignition Controllers & Drivers A 595-DRV8884RHRT

4 RS-422 line receiver,DS26C32ATN 25pcs

OP Amp Dual GP R-R O/P ±8V/16V 8-Pin TSSOP T/R

Texas Instruments TL3116IDRG4 is a single high-speed voltage comparator operating from ±5 V dual or 10 V single supply, with 3.5 mV max offset voltage and 1.1 µA input bias current, packaged in an 8-pin SOIC. Available worldwide with RoHS compliance.

Voltage References Lo-Vtg Adj Precision Shunt Regulator

The LT1014DDWRE4 is a quad precision operational amplifier from Texas Instruments featuring 117 dB typical CMRR, 800 µV maximum input offset voltage, and 30 nA maximum input bias current at 25°C. It provides four independent voltage-feedback amplifiers with frequency compensation in a Small Outline package. Available from stock with worldwide shipping.

V-Ref Adjustable 1.24V to 18V 70mA 3-Pin SOT-23 T/R

Differential Amplifiers Fully Differential I/O Low Noise

PLASTIC, SO-16

RF Detector RF Power Detector for CDMA and WCDMA in micro SMD 6-WSON -40 to 85

The TMS320F28375SPZPQR is a 32-bit C28x RISC automotive-grade digital signal controller from Texas Instruments with 1MB Flash, integrated ADC and DAC channels, and up to 200 MHz dual-core performance. It operates at 1.2V/3.3V supply and is packaged in a 100-pin HTQFP with tape-and-reel delivery. Available lead-free with worldwide in-stock shipping.

The TMS320C6202GJLA200 is a 32-bit fixed-point digital signal processor from Texas Instruments running at up to 200MHz with a 22-bit address bus, 32-bit external data bus, and boundary scan support in a BGA package. It delivers high-throughput DSP computation for demanding signal processing pipelines requiring dual supply at 3.3V and core voltage. Available from stock worldwide with competitive pricing.

Data Acquisition ADCs/DACs - Specialized A 595-AMC1035D

Digital Isolators Automotive, robust EMC, triple-channel, 2/1, reinforced digital isolator 16-SSOP -40 to 125

SN74LS169BNE4 is a synchronous 4-bit up/down binary counter in a 16-pin DIP package from the 74LS logic family. It operates at up to 20 MHz, provides parallel load and terminal count output, and cascades easily for wider count ranges. Suitable for frequency division, event counting, and address generation in digital control circuits.

1.5A Stepper Motor Driver with 1/16 Microstepping and Integrated Current Sensing (STEP/DIR Ctrl)

Digital Signal Processors & Controllers - DSP, DSC Floating-Point Digital Signal Processor 256-BGA

Use the download button to access the DRV8886ATRHRR schematic symbol, PCB footprint, and 3D model.

Texas Instruments DRV8886RHRT is a 2 A bipolar stepper motor driver with integrated current sensing, eliminating external sense resistors. It supports up to 1/32 microstepping and operates from a 4.5 V to 33 V supply in a compact 28-pin QFN package. Available from stock worldwide.

Analog to Digital Converters - ADC 12B 4-Ch Serial Output Sampling ADC

2A Stepper Motor Driver With Integrated Current Sense and smart tuning technology

DRV8884RHRT is a 1.0 A stepper motor driver with 1/16 microstepping and integrated current sensing by Texas Instruments in a 28-pin QFN package. Key specs: 1.7 A peak output current, STEP/DIR control interface. In stock worldwide with competitive pricing.

Analog Front End - AFE Low-Noise,8 Channel 16 Bit Ana ADC

Comparator Single ±15V/30V Automotive 8-Pin SOIC T/R

Fast Charge Management NiCD/NiMH 2000mA 8-Pin SOIC T/R

Digital Bus Switch ICs 2B 1of4 Fet Multipl/ Demult Hi-BW Bus Sw

Logic Gates Single 2-input, 4.5-V to 5.5-V AND gate with TTL-compatible CMOS inputs 5-SOT-23 -40 to 125

Battery Management NiCd/NiMH Switchmode Charge Mngmnt IC

Digital Bus Switch ICs 2B 1-of-4 Fet Mult/ Demul Hi-BW Bus Sw

Digital Bus Switch ICs 2B 1of4 Fet Multipl/ Demult Hi-BW Bus Sw

LM3S8930-EQC50 is a 32-bit ARM Cortex-M3 microcontroller in a QFP package by Texas Instruments targeting industrial applications. It integrates CAN controller, Ethernet MAC, and multiple peripherals running up to 50 MHz. Available from stock worldwide at competitive pricing.

Battery Management 1S 7A Battery Switch Charger with Integrated ADC 42-DSBGA -40 to 85

Logic Gates 13-input positive-NAND gates 16-PDIP 0 to 70

Operational Amplifiers - Op Amps Quad Op Amp

模数转换器 - ADC 16-Bit 250kHz Sampling CMOS

UART Interface IC Quad UART with 16-Byte FIFOs

SSOP-16

Digital to Analog Converters - DAC 8-Bit 10us Quad DAC Serial Input

Differential Amplifiers HS Full Diff

Full-Duplex M-LVDS Transceiver