Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 54,651–54,700 of 77,666
Dual Transmitter/Receiver RS-232 16-Pin SOIC Tube
The UCC3917D is a hot swap voltage controller from Texas Instruments in a 16-pin SOIC package. It manages positive floating supply rails with adjustable current limiting and fault protection. Available with commercial temperature rating for industrial power management designs.
Bus Transceivers 3.3-V ABT Octal Bus Trncvr W/3-St Otpt
The TLV431CDBVT is an adjustable precision shunt voltage regulator from Texas Instruments with 1.5% initial accuracy and a reference voltage range of 1.24 V to 6 V. Housed in a 5-pin SOT-23 surface-mount package, it operates with a cathode current of 80 µA to 15 mA over a 0 °C to 70 °C temperature range. Suited for feedback control in switched-mode power supplies, voltage monitoring, and precision reference circuits.
Power Switch ICs - Power Distribution 40-V, 8-mOhm, 1-Ch smart high-side switch
TLC7135CNG4 is a 4.5-digit dual-slope integrating ADC with 1-channel analog input, accepting -3 V to +6 V analog range and operating from ±5 V supplies. Its dual-slope conversion architecture delivers high noise rejection at 0.003 kSPS throughput. The 28-pin PDIP package suits precision bench instruments, digital panel meters, and laboratory measurement equipment.
DIP, DIP14,.3
High Speed Operational Amplifiers 1.8GHz Current Feedback Amplifier
IC OPAMP GP 2 CIRCUIT 8SOIC
OP Amp Dual GP R-R I/O ±8V/16V 8-Pin SOIC Tube
Comparator Single 8-Pin SOIC T/R
Use the download button to access the TL3016IPWR schematic symbol, PCB footprint, and 3D model.
High accuracy 3.3 V or 5 V digital PWM-output Hall effect sensor family
High Speed Operational Amplifiers 1.8GHz Current Feedback Amplifier
OP Amp Single Current Fdbk ±7.5V/15V 8-Pin VSSOP T/R
The THS4140IDGN is a 160 MHz fully differential input/output operational amplifier from Texas Instruments featuring voltage-feedback architecture with a high slew rate and shutdown capability. It delivers 75 dB minimum CMRR and 15 µA max input bias current in a compact small outline package. Available in stock worldwide with competitive pricing.
Use the download button to access the THS3111IDG4 schematic symbol, PCB footprint, and 3D model.
Operational Amplifiers - Op Amps 1MHz 45uA RRIO Quad Op Amp
16-bit Microcontrollers - MCU 48kB Flash 2MB RAM 12-Bit ADC/Dual DAC
Latch Transparent 3-ST 8-CH D-Type 20-Pin TSSOP T/R
120V half-bridge driver with cross conduction protection and low switching losses
Analog Comparators COMPARATOR WITH FIXED REFERENCE VOLTAGE
SN74HC373PWRE4 is an octal transparent D-type latch with active-low enable control in a 20-pin TSSOP package, rated for 150 pF load capacitance and 7.8 mA output current. From $0.45, in stock worldwide shipping.
Texas Instruments SN74HC373PWE4 is an octal transparent D-type latch from the HC/UH logic family featuring 8 independent latched outputs with active-low output enable in a 20-pin TSSOP package. It drives bus loads up to 150 pF at 7.8 mA sink current for reliable address and data bus demultiplexing. Available from stock worldwide with fast shipping.
Buffers & Line Drivers QUAD BUS BUFFER GATE
Digital Signal Processors & Controllers - DSP, DSC Fixed-Pt Dig Signal Processor
Logic Gates Quadruple 2-Input Exclusive-OR Gate
Buffers & Line Drivers Sgl Bus Buffer Gate
0.001-µV/°C Drift, low power, rail-to-rail Output, 36-V operational amplifiers zero-drift series
Instrumentation Amplifiers Lo-Pwr Single Sply CMOS
Multiplexer Switch ICs Dual 1-Of-4 FET Mltplxr/Demltplxr
Single Low-Voltage, Cost-Optimized Rail-to-Rail Output Operational Amplifier
Analog to Digital Converters - ADC 24-Bit 20kHz Low Power
Inverters Lo PWR SNGL Schmitt Trgr Invrtr
Latches Tri-St Octal D-Type
The UC3871DWG4 is a fluorescent lamp controller IC from Texas Instruments using current-mode resonant control with a 4.5 V to 20 V input voltage range. It comes in an 18-pin SOIC package suitable for compact lighting driver designs. Available from stock worldwide with competitive pricing.
NAND Gate 4-Element 2-IN CMOS 14-Pin TSSOP T/R
60-V input, 3.5-A, step-down DC/DC converter with Eco-Mode™
Display Drivers & Controllers Resonant Fluorescent Lamp Driver
SMJ320C6701GLPW14 is a 32-bit floating-point DSP from Texas Instruments based on the C6701 core, running at up to 140 MHz for 1120 MFLOPS of peak performance in a 429-pin CFCBGA package. Operates over -55°C to 115°C case temperature range with JTAG boundary scan and 32-bit external data bus. Available from stock worldwide.
Display Drivers & Controllers Resonant Fluorescent Lamp Driver
Switching Voltage Regulators 60-V input, 3.5-A, step-down DC/DC converter with Eco-Mode 8-SO PowerPAD -40 to 150
Digital to Analog Converters - DAC 12-Bit Sngl Channel DAC
Use the download button to access the LM5164QDDARQ1 schematic symbol, PCB footprint, and 3D model.
1-Channel industry standard low voltage operational amplifier
2VRMS DirectPath™, 106dB Audio Stereo DAC with 32-bit, 384kHz PCM Interface
The CD4541BF is a programmable timer IC operating from -55°C to 125°C in a 14-Pin CDIP ceramic package. Features binary counting with up to 1.5 MHz frequency and 50 pF load capacitance. Available from stock with worldwide shipping.
Texas Instruments ISO7761FQDWQ1 is an automotive-grade, high-speed six-channel digital isolator rated to AEC-Q100 Grade 1. It supports data rates up to 100 Mbps per channel with a 2.25 V to 5.5 V supply range on both sides. Available in a 16-pin SOIC package in stock worldwide with automotive pricing.
LVDS Driver/Receiver 100Mbps 0.65VV 8-Pin SOIC Tube
V-Ref Precision 4.096V 15mA 3-Pin SOT-23 T/R
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote