Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 53,051–53,100 of 77,666
24-bit, 40-kSPS, 2-ch delta-sigma ADC with ±20-V input, PGA, IDACs, GPIOs and VREF
500-mA 18-V ultra-low-IQ low-dropout (LDO) linear voltage regulator with power good
Board Mount Hall Effect / Magnetic Sensors Automotive Analg-Bip Sensor 3-SOT-23
LDO Regulator Pos 2.5V 0.1A Automotive 5-Pin SOT-23 T/R
Use the download button to access the OPA2156IDR schematic symbol, PCB footprint, and 3D model.
Use the download button to access the TLV316QDBVTQ1 schematic symbol, PCB footprint, and 3D model.
22-V Input, 12-A Integrated FET Converter with Ultra-Low Quiescent
The UCC3813DTR-5 is a low-power BiCMOS current-mode PWM controller from Texas Instruments operating from 4V to 11V input voltage range. It features pulse width modulation with current-mode control for efficient switching power supply design in an 8-pin SOIC package. In stock at authorized distributors worldwide with fast global shipping.
Single Output LDO, 800mA, Fixed and Adj., Internal Current limit, Thermal Overload Protection
The PTPS3840DL20DBVR is a nanopower high-input voltage supervisor with manual reset and programmable reset time delay by Texas Instruments. Key specs: 2.0 V threshold, single-channel monitoring, SOT-23 5-pin package. Available from stock with worldwide shipping.
Dual-channel 14-bit 125-MSPS analog-to-digital converter (ADC) with extended temperature range
The PUCC21732QDWQ1 is an automotive-grade single-channel isolated gate driver for SiC MOSFETs and IGBTs with 10-A peak output current and high CMTI in a 16-pin SOIC-W package. It features advanced protection functions, Schmitt-trigger input, and totem-pole output for fast switching. Available in stock worldwide with AEC-Q100 automotive qualification.
AEC-Q100, 26V, bi-directional, low-/high-side, voltage output current sense amplifier
Automotive Catalog Hex Schmitt-Trigger Inverters
The UCC27200DR is a high-frequency half-bridge gate driver from Texas Instruments supporting up to 120V bootstrap operation with 3A peak source and sink current. It integrates under-voltage lockout protection and drives both high-side and low-side MOSFETs. Available from stock with worldwide shipping.
High-Performance Current-Mode PWM Controller
1.5A White LED Driver for Notebooks
4.5 V to 18 V input, dual 2 A output, synchronous step-down converter, with adjustable soft start
150-mA 30-V ultra-low-Iq wide-input low-dropout (LDO) regulator with reverse current protection
The TL431IDBVRG4 is an adjustable precision shunt voltage regulator from Texas Instruments in a SOT-23-5 package. It provides an adjustable output voltage from 2.495V to 36V with 0.5% initial accuracy and up to 100mA output current. From $0.20, available in stock with worldwide shipping.
Use the download button to access the CY74FCT541TSOC schematic symbol, PCB footprint, and 3D model.
10-Bit, 2.5 us Dual DAC, Serial Input, Pgrmable Settling Time
Low power, small size comparator with push-pull output
Texas Instruments CD74ACT574M96 is an octal non-inverting D-type flip-flop with 3-state outputs in the ACT logic family. Features 8 independent flip-flops clocked simultaneously with active-low output enable, a 50 pF load capacitance rating, and a 20-pin SOIC package. Available from authorized distributors with worldwide shipping.
16-Bit Transparent D-Type Latches With 3-State Outputs
Voltage Supervisor with Programmable Time Delay
PWM input 300W Stereo class D amplifier with integrated feedback
TLC7701QPW is a voltage supervisor and reset IC with programmable time delay from Texas Instruments in 8-pin SOIC package. Includes power-on reset generator with single-channel monitoring and programmable reset threshold. Available from stock worldwide with competitive pricing.
The TLV2762IDGK is a dual micro-power rail-to-rail operational amplifier from Texas Instruments operating from a single 1.8V supply with 76dB typical CMRR. It features ultra-low bias current of 0.2nA maximum and 3.5mV maximum input offset voltage in a compact MSOP-8 package. Available from stock with worldwide shipping.
MSP430F534x Mixed Signal Microcontroller
3.3V, Full-Duplex RS-485, 16kV IEC ESD, 20Mbps data rate, No Enables
12 Bit, 1 MSPS, Dual, Simultaneous Sampling Differential SAR ADC
Z-Accel 2.4 GHz ZigBee Processor (formerly CCZACC06A1)
Use the download button to access the TPS562231DRLR schematic symbol, PCB footprint, and 3D model.
Radiation hardened 3.3V CAN transceiver in space enhanced plastic package with standby mode
Automotive 2.5V to 5.5V Hall effect unipolar switch
Dual 1.5A Current-Limited, Power Distribution Switch
TPS2049DR is a single-channel power load switch IC from Texas Instruments, supporting 2.7V to 5.5V input voltage range with controlled power distribution and enable control. It is housed in an 8-pin SOIC package for compact power management integration. Available in stock with worldwide shipping.
Low-Power BiCMOS Current-Mode PWM
Use the download button to access the TPS54314PWPR schematic symbol, PCB footprint, and 3D model.
High Output Drive, Low Voltage, Single Operational Amplifier
80V, Low-/High-side, High-Speed, Voltage Output CSA with Dual Comparators
Octal D-Type Transparent Latches With 3-State Outputs
Octal Bus Transceivers And Registers With 3-State Outputs
The SN74ALS645A-1NSR is an octal bus transceiver with 3-state outputs, featuring bidirectional data flow with common direction control. Supports ALS logic family with 50 pF load capacitance in SOIC-20 package. Available from stock with worldwide shipping.
High-Performance Current-Mode PWM Controller
Octal Edge-Triggered D-Type Flip-Flops with 3-State Outputs
DIP-16
High Output Full-Duplex RS 485 Drivers and Receivers
Automotive Qualified SIMPLE SWITCHER® 4V to 36V,3A Synchronous Step-Down Converter
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote