TDK

MULTILAYER CERAMIC CHIP CAPACITORS, 1005, Commercial grade, general (Up to 75V)

0805 X5R ceramic capacitor 22uF 16V TDK 0805 C 22??F Ceramic Multilayer Capacitor, 16 V dc X5R Dielectric ??10% SMD

Multilayer Ceramic Capacitors MLCC - SMD/SMT 0603 0.01uF 100volts C0G +/-5% 0.80mm

Multilayer Ceramic Capacitors MLCC - SMD/SMT 0402 1000pF 100volts C0G +/-5% 0.50mm

0402 X7R ceramic 100nF 50V Auto TDK 0402 CGA 100nF Ceramic Multilayer Capacitor, 50 V, +125°C, X7R Dielectric, ±10% SMD

MULTILAYER CERAMIC CHIP CAPACITORS, 1005, Commercial grade, general (Up to 75V)

0402 X5R ceramic capacitor 10V 100nF TDK C1005 C 100nF Ceramic Multilayer Capacitor, 10 V dc X5R Dielectric ±10% SMD

Multilayer Ceramic Chip Capacitors, Capacitance=0.1μF, LxWxT:1x0.5x0.5mm

MULTILAYER CERAMIC CHIP CAPACITORS, 1005, Commercial grade, general (Up to 75V)

0402 X5R ceramic capacitor 100nF 25V TDK 0402 C 100nF Ceramic Multilayer Capacitor, 25 V dc X5R Dielectric ??10% SMD

Multilayer Ceramic Chip Capacitors, Capacitance=39pF, LxWxT:1x0.5x0.5mm

0402 X5R ceramic capacitor 16V 1uF TDK C1005 C 1??F Ceramic Multilayer Capacitor, 16 V dc X5R Dielectric ??10% SMD

Capacitor MLCC 0402 6.3V 10uF X5R Capacitor MLCC 0402 6.3V 10uF X5R

0603 X5R ceramic capacitor 1uF 50V TDK 0603 C 1μF Ceramic Multilayer Capacitor, 50 V dc, +85°C, X5R Dielectric, ±10% SMD

MULTILAYER CERAMIC CHIP CAPACITORS, 1005, Commercial grade, general (Up to 75V)

Multilayer Ceramic Capacitors MLCC - SMD/SMT 1206 0.068uF 100volt C0G +/-5% 1.60mm

Common Mode Choke 1kR R1 1,2A SMD TDK ACP Series Shielded SMD Common Mode Line Filter 2A Idc

CHIP

Multilayer Ceramic Capacitors MLCC - SMD/SMT 1206 0.1uF 100volts C0G +/-5% 1.60mm

MULTILAYER CERAMIC CHIP CAPACITORS, 3216, Commercial grade, general (Up to 75V)

CHIP

CHIP

RADIAL LEADED

Leaded Disk Varistors, Max. Operating Voltage [AC]=420Vrms, Max. Surge Current Imax(8/20μs,1time)=2500A

RADIAL LEADED

Metallized Polyester Capacitors (MKT), 0.10uF, 250V DC, 4mm(W) x 8.5mm(H) x 10mm(L)

TDK VGT10SEE-200S2A5 is a flyback transformer for IGBT and FET gate drive circuits, featuring 20 µH primary inductance with a 1:1:1:1 turns ratio, 2 primary and 2 secondary windings, surface mount package rated to AEC-Q200 automotive standards.

Common Mode Chokes / Filters 0805 280ohms 300mA Common Mode Filter

MLJ1608WR39KT000 from TDK is a surface-mount power inductor for DC-DC converter filtering and compact power rails. Key specs include 2 pins, -55°C to 125°C, and surface-mount termination. RFQ sourcing supports in-stock checks and worldwide shipping.

TDK MMZ1608S601ATD25 is an automotive-grade AEC-Q200 multilayer ferrite bead chip in 0603 (1608 metric) package, rated 600 Ohm impedance at 100 MHz with 500 mA current capacity and 350 mOhm maximum DCR. From $0.12, in stock with worldwide shipping.

MULTILAYER CERAMIC CHIP CAPACITORS, 3225, Commercial grade, general (Up to 75V)

TDK ICM-20789 is a 6-axis IMU combining a 3-axis gyroscope and 3-axis accelerometer with an integrated pressure sensor in a compact LGA-24 package, operating from 1.71 V to 3.45 V. Designed for IoT, wearables, and AR/VR applications requiring precise motion sensing at ultra-low power consumption.

FG24X7R1H224KNT00 is a capacitor from TDK for power filtering and decoupling. It provides 2 pins in 2-pin layout for repeatable production sourcing. From $0.00 in stock worldwide shipping.

MULTILAYER CERAMIC CHIP CAPACITORS, 3216, Commercial grade, general (Up to 75V)

FG18X7R2A103KNT06 is a TDK capacitor for board-level electronic assemblies. Key specs include 2 pins and -55 to 125 °C operating range. From RFQ pricing, FindMyChip supports stock checks and worldwide shipping.

MPZ1005A151ET000 is a TDK chip resistor for OEM production, repair, and approved BOM replacement. Key specs: 2 pins, -55°C to 125°C, 800 mA; package: Ferrite Bead Chip. FindMyChip supports inquiry-based sourcing, inventory checks, and worldwide shipping.

SPM6550T-3R3M-HZ is an inductor from TDK for power filtering and DC-DC converter. It provides 2 pins in 2-pin layout for repeatable production sourcing. From $0.00 in stock worldwide shipping.

Multilayer Ceramic Capacitors MLCC - SMD/SMT 1210 1000V 4700pF C0G 5% AEC-Q200

Antennas CERAMIC CHIP ANTENNA Sub-GHz 902-930MHz

MLZ2012N3R3LT000 is a TDK inductor for DC-DC converters and EMI filtering. Key specs include 2 pins, Inductors Chip, and Inductors Chip. From quoted pricing with in stock worldwide shipping support.

2200 pF ±20% 440VAC Ceramic Capacitor E Radial, Disc

Multilayer Ceramic Capacitors MLCC - SMD/SMT CGB 0402 16V 1uF X5R 10% T: 0.33mm

VLF3012ST-2R2M1R4 is a TDK inductor component for regulated power conversion designs. It supports 2 pins in a surface-mount package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.

TDK HHM1711Q1 is a surface mount RF transformer with a 2300 MHz minimum cut-off frequency and 1 dB insertion loss in a compact 0.6 mm height package. Suitable for high-frequency signal coupling in wireless communication designs. Available from authorized distributors with worldwide shipping.

SMD / SMT Inductors (Coils), L=100?H, L x W x T :

TDK FG28X7R1H102KNT06 is a 0.001 µF (1000 pF) X7R ceramic capacitor rated at 50 V DC in a radial through-hole package, standing 5.5 mm tall for easy hand or wave-soldering assembly. Delivers stable capacitance across temperature with X7R dielectric and RoHS-compliant construction. Available in stock with worldwide shipping.

TDK SPM12565XT-2R8M150 is a 2.8 µH metal-core power inductor in a 12565 rectangular SMD package rated at 150 A DC, with ultra-low DC resistance of 5.2 mΩ. Available from stock with worldwide shipping.

TDK CLF12577NIT-470M-D is a 47 µH ±20% shielded wire-wound SMD power inductor with a ferrite core in a 5049 case (12.5 × 12.5 × 7.7 mm). It features a low DC resistance of 0.066 Ω and is rated for high-current power conversion applications. Available from authorized distributors with worldwide shipping.

The TCM1210-900-2P-T is a TDK TCM-series wire-wound SMD data-line filter in a 1210 (3225M) ferrite-core package with 90 Ω output impedance, 100 mA rated DC current, and 1.2 Ω maximum DC resistance. Ideal for EMI suppression on high-speed data and communication lines.

Common Mode Filters / Chokes, |Z|=360Ω at 100MHz, L x W x T :