RS Components

331-6437 is a RS Components connector for board interconnects, cable assemblies, mezzanine links, and test fixtures. Key details include 8 -W, 8 pins. From RFQ pricing with in-stock sourcing checks and worldwide shipping support through FindMyChip.

RS Pro 3 → 30 V dc 95dB Through Hole Continuous Internal Piezo Buzzer, 2900 → 3900 Hz

RS Pro 5.08mm Pitch Right Angle PCB Terminal Block with Clamp Termination, PCB Mount, 4 Way

RS Pro Thick Film Surface Mount Resistor 1206 Case 10kΩ 1% 0.25W ±100ppm/°C

RS Pro Thick Film Surface Mount Resistor 1206 Case 300Ω 1% 0.25W ±100ppm/°C

RS Pro Thick Film Surface Mount Resistor 1206 Case 75Ω 1% 0.25W ±100ppm/°C

RS Pro Thick Film Surface Mount Resistor 1206 Case 56Ω 1% 0.25W ±100ppm/°C

SPDT PCB Mount Non-Latching Relay Through Hole, 16 A, 12V dc

RS Pro NPIM104B Series Shielded Wire-wound SMD Inductor with a Ferrite Core, 10 μH ±20% 8.5A Idc

RS Pro NPIS104F Series Shielded Wire-wound SMD Inductor 47 μH ±20% 1.9A Idc

RS Pro NPIS27H Series Shielded Wire-wound SMD Inductor 330 μH ±20% Wire-Wound 950mA Idc

RS Pro 741-9007 Series Shielded Wire-wound SMD Inductor 150 μH ±20% Wire-Wound 3.9 A Idc

RS Pro NPIS27H Series Shielded Wire-wound SMD Inductor 33 μH ±20% Wire-Wound 3A Idc

RS Pro NPI52W Series Wire-wound SMD Inductor 100 μH ±20% Wire-Wound 3A Idc

RS Pro NPI43C Series Wire-wound SMD Inductor 4.7 μH ±20% Wire-Wound 1.9A Idc

RS Pro SCP Series, Through Hole IDC Connector Plug, 50 Way, 2 Row, 2.54mm Pitch

RS Pro SCP Series, Through Hole IDC Connector Plug, 34 Way, 2 Row, 2.54mm Pitch

RS Pro SCP Series, Through Hole IDC Connector Plug, 40 Way, 2 Row, 2.54mm Pitch

RS Pro SCP Series, Through Hole IDC Connector Plug, 26 Way, 2 Row, 2.54mm Pitch

RS Pro SCP Series, Through Hole IDC Connector Plug, 20 Way, 2 Row, 2.54mm Pitch

RS Pro SCP Series, Through Hole IDC Connector Plug, 14 Way, 2 Row, 2.54mm Pitch

RS Pro SCP Series, Through Hole IDC Connector Plug, 16 Way, 2 Row, 2.54mm Pitch

RS Pro SCP Series, Through Hole IDC Connector Plug, 10 Way, 2 Row, 2.54mm Pitch

Toggle Switch SPDT On-On, 0.4 A@ 20 V, PCB

1MS3T1B1M2QES-1 is an RS Components SPDT toggle switch for PCB mounting. Key specs include On-Off-On operation and a 5 A rating. Request quote pricing, stock checks, and worldwide shipping.

1MS1T1B1M2QES-1 is a RS Components switch for production electronic assemblies. Key specs include 5 A, 3-pin, and Other. From RFQ pricing, check stock for worldwide shipping.

1MS1T1B1M1QES-1 is an RS Components panel-mount SPDT toggle switch. Key specs include On-On operation and a 5 A rating. Request quote pricing, stock checks, and worldwide shipping.

RS Components 0525798 is an RS Pro rechargeable NiMH coin-cell battery. Key specs include 3.6 V output, 20 mAh capacity, and PCB pin terminals. Request inquiry pricing, stock checks, and worldwide shipping.

RS Components 0525792 is an RS Pro rechargeable NiMH coin-cell battery. Key specs include 3.6 V output, 160 mAh capacity, and PCB pin terminals. Request inquiry pricing, stock checks, and worldwide shipping.

RS Components 0476618 is an SPDT non-latching through-hole PCB relay. Key specs include a 24 V DC coil and 10 A contact rating. From $ price via RFQ, with in-stock sourcing and worldwide shipping.

RS Components 0476628 is a PCB-mount latching relay for power applications. Key specs include SPST normally-open contacts and a 24 V DC coil. Request inquiry pricing, stock checks, and worldwide shipping.

0476583 is an RS Components non-latching SPDT PCB relay. Key specs include a 12 V DC coil, 10 A rating, and through-hole mounting. Request quote pricing, stock checks, and worldwide shipping.

1MD3T1B1M2QES-1 is a RS Components switch for production electronic assemblies. Key specs include 5 A, 120 V, and Other. From RFQ pricing, check stock for worldwide shipping.

0525811 is an RS Pro rechargeable NiMH coin cell battery for PCB backup power. It provides 4.8 V nominal output, 160 mAh capacity, and 3-pin PCB terminals. From quote-based pricing, in stock worldwide shipping.

1MD1T1B1M2QES-1 is a RS Components switch for production electronic assemblies. Key specs include 5 A, 6-pin, and Other. From RFQ pricing, check stock for worldwide shipping.

0495868 is an RS Pro radial mica capacitor for precision circuits. Key specs include 1 nF capacitance, 500 V dc rating, +/-1% tolerance, and 2-pin termination. From quoted pricing, inquiry stock supports worldwide shipping.

RS Components 0476725 is a PCB-mount non-latching electromechanical relay for control switching. It provides SPDT contacts, 12 V dc coil operation, through-hole mounting, and 6-pin termination. From quote-based supply with worldwide shipping support.

RS Components 0449348 is a female through-hole stereo jack socket. Key specs include a 1/4-inch audio interface, 3 A listed rating, and PCB mounting. From $ price via RFQ, with in-stock sourcing and worldwide shipping.

RS Components 0429509 is a PCB slide switch with DPDT on-on action. Key electrical specs include 0.4 A switching at 20 V. Request inquiry pricing, stock checks, and worldwide shipping.

0429498 is an RS Components PCB slide switch for board-level signal control. It provides SPDT On-On switching rated 0.4 A at 20 V with 3 pins. Available by inquiry with worldwide shipping support.

0228191 is a 470 microhenry ferrite leaded inductor by RS Pro. Key specs: 240 mA DC current and axial construction. From quote-based pricing, in stock with worldwide shipping.

0228179 is an RS Pro ferrite-core leaded inductor for PCB assemblies. Key specs include 100 µH inductance, 550 mA DC rating, and axial mounting. Request quote pricing, stock checks, and worldwide shipping.

0228157 is an RS Pro ferrite leaded inductor for through-hole filtering and energy storage. It provides 22µH inductance, 430mA current rating, 1.1Ω resistance, and axial horizontal mounting. From $quote, check in-stock supply with worldwide shipping.

RS Components 0228141 is an RS Pro ferrite leaded inductor. Key specs include 10 µH inductance, 1.5 A DC current, and 95 mΩ DC resistance. Request inquiry pricing and worldwide shipping.

0228113 is an RS Pro leaded ferrite inductor for power filtering. Key specs include 1 µH inductance, 3.3 A DC-current capability, and axial horizontal mounting. From RFQ pricing, in-stock sourcing and worldwide shipping are available.

0136976 is an RS Pro right-angle TNC jack for PCB mounting. Key specs include 50 Ω impedance and solder termination. Request quote pricing, stock checks, and worldwide shipping.

0113263 is a RS Components capacitor for production electronic assemblies. Key specs include 100pF, 160 V, and Capacitors, Polarized Axial Diameter Horizontal Mounting. From RFQ pricing, check stock for worldwide shipping.

0113207 is an RS Pro axial through-hole polystyrene film capacitor. Key specs include 10 pF capacitance, ±10% tolerance, 160 V DC rating, and 4 mm body. Request quote pricing, stock checks, and worldwide shipping.

RS Components 897-1152 is an 8-position shrouded header connector. It uses a 3.81 mm pitch, right-angle PTH box form for secure board wiring. Used in control panels, power modules, and industrial PCB interconnects.

707-8808 is an RS Components carbon film axial resistor for through-hole circuits. It provides 22 ohm resistance, 5% tolerance, and 2 W power. Use it for current limiting, bias networks, repairs, and stocked worldwide procurement.