Analog Devices

The Analog Devices MAX6398ATT+ is a single-channel overvoltage protection switch and limiter controller operating up to 72 V with an adjustable threshold. Housed in a compact 6-LFCSP 3x3x0.75 mm package. Available in stock with worldwide shipping.

The Analog Devices MAX517BEPA+ is an 8-bit DAC with a 2-wire I2C-compatible serial interface and rail-to-rail output capability in an 8-pin DIP package. It accepts a single supply voltage and delivers an output spanning the full supply rail, simplifying use with 3 V and 5 V microcontroller systems. Available worldwide in lead-free packaging for industrial and consumer designs.

1/1 Transceiver Full RS422, RS485 8-MSOP

MAX9017AEKA/V+T from Analog Devices is a power-management IC for industrial and automotive power-supply designs. Key specs include 8 pins, -40°C to 85°C, and SOT23 (8-Pin). RFQ sourcing supports in-stock checks and worldwide shipping.

Interface - Signal Buffers, Repeaters I2C Bus Buffer with Stuck Bus Recovery

MAX96700GTJ/V+ from Analog Devices is a integrated circuit for industrial, consumer, and embedded electronic assemblies. Key specs include 32 pins, -40°C to 115°C, and Quad Flat No-Lead. RFQ sourcing supports in-stock checks and worldwide shipping.

Digital to Analog Converters - DAC 16-Ch12-BITnanoDAC+with2ppm/Cref,SPI

Digital to Analog Converters - DAC SI,High Temp,V-Out,unbuffered 16-Bit DAC

MAXIM INTEGRATED PRODUCTS - MAX312EUE+ - Analogue Switch, 4 Channels, SPST, 10 ohm, 9V to 36V, ± 4.5V to ± 20V, TSSOP, 16 Pins

5V, 3A Synchronous Step-Down Silent Switcher in 2mm x 2mm LQFN

40V, Low IQ, 3MHz, Triple Output Buck/Buck/Boost Synchronous Controller

Low Cost CMOS, High Speed, Rail-to-Rail Amplifiers (Dual)

LT1086CM-3.6 from Analog Devices is a power-management IC for industrial and automotive power-supply designs. Key specs include 4 pins, 1086 - 1.5A, and manufacturer package geometry. RFQ sourcing supports in-stock checks and worldwide shipping.

INST Amp Single R-R O/P ±18V/36V 8-Pin MSOP T/R

Analog to Digital Converters - ADC 18-B, 10Msps SAR ADC

MAX1454AUE+T from Analog Devices is a signal-interface IC for communications, signal routing, and interface protection designs. Key specs include 16 pins, -40°C to 125°C, and Small Outline Packages. RFQ sourcing supports in-stock checks and worldwide shipping.

LFCSP, 40 PIN

Battery Management Linear Li+ Battery Charger with Integrated Pass FET and Thermal Regulation in 3mm x 3mm Thin DFN

ADSP-TS101SAB2Z000 is a Analog Devices Integrated Circuit for embedded systems, signal routing, communication interfaces, and control electronics. It combines -40°C to 85°C with BGA with 484 pins. FindMyChip supports technical sourcing, stock checks, and worldwide shipping for this part.

QFN-24

Multi-Phase Current Mode Step-Up DC/DC Controller

Analog Devices ADSP-TS101SAB2Z100 is a TigerSHARC 32-bit DSP running at up to 100 MHz with 64-bit external data bus, 484-pin PBGA package, and JTAG boundary scan support. Available from stock with worldwide shipping.

Analog Devices ADP124ARHZ-1.8-R7, Dual LDO Regulator, 500mA, 1.8 V, 1.5% 8-Pin, MSOP

1-Channel Single ADC SAR 250ksps 18-bit Parallel/Serial 48-Pin LQFP T/R

Current Sense Amplifiers Hi V, Bi-dir C Sense Amp

Analog Devices MAX16922ATPO/V+T is a dual 2.2MHz current-mode PWM step-down DC-DC converter with 3.7V to 28V input range, independent output control, and a compact 20-pin LFCSP package for automotive and industrial power systems.

Linear Voltage Regulators 500mA LDO 3.0Vout

Analog to Digital Converters - ADC 8Channel,12Bit ADC - I2C Interface IC

DS28C50Q+U is a Analog Devices capacitor for power filtering, decoupling, timing, and energy-storage sections of electronic assemblies. Key details include 7 pins, Small Outline No-lead, and datasheet-backed parameters. Available through FindMyChip sourcing with worldwide shipping support.

MAX20446ATG/V+ is a Analog Devices capacitor for power filtering, decoupling, timing, and energy-storage sections of electronic assemblies. Key details include 24 pins, Quad Flat No-Lead, and datasheet-backed parameters. Available through FindMyChip sourcing with worldwide shipping support.

Analog to Digital Converters - ADC 2.7V to 3.6V and 4.5V to 5.5V, Low-Power, 4-/8-/12-Channel, 2-Wire Serial 8-Bit ADCs

MAX32650GCE+ is a Analog Devices capacitor for power filtering, decoupling, timing, and energy-storage sections of electronic assemblies. Key details include 144 pins, Quad Flat Packages, and -40°C to 105°C. Available through FindMyChip sourcing with worldwide shipping support.

Current Sense Amplifiers Hi V, Bi-dir C Sense Amp

Analog Devices MAX16813BATP/V+ is a 4-channel, integrated high-brightness LED driver with a high-voltage DC-DC controller and battery disconnect in a 20-pin 4x4 mm QFN package. It drives 4 independent LED strings with PWM dimming control and input protection for automotive and industrial lighting systems. Available globally with worldwide shipping.

Surge Stopper with Ideal Diode

RS-232 Interface IC 5V 2Dx/2Rx RS232

MAX9939AUB/V+T is a Analog Devices capacitor for power filtering, decoupling, timing, and energy-storage sections of electronic assemblies. Key details include 10 pins, Small Outline Packages, and -40°C to 125°C. Available through FindMyChip sourcing with worldwide shipping support.

MAX16550GPN+ is a Analog Devices capacitor for power filtering, decoupling, timing, and energy-storage sections of electronic assemblies. Key details include 18 pins, 18-LFCSP-4X4.5X0.95, and UNSPECIFIED. Available through FindMyChip sourcing with worldwide shipping support.

MAX9918ASA/V+ is a Analog Devices capacitor for power filtering, decoupling, timing, and energy-storage sections of electronic assemblies. Key details include 8 pins, Small Outline Packages, and -40°C to 125°C. Available through FindMyChip sourcing with worldwide shipping support.

► Ultralow noise: 9 µV rms, independent of VOUT ► No additional noise bypass capacitor required ► Stable with 1 µF ceramic input and output capacitors ► Maximum output current: 150 mA ► Input voltage range: 2.2 V to 5.5 V ► Low quiescent current ► IGND = 10 µA with zero load ► Low shutdown current: <1 µA ► Low dropout voltage: 105 mV at 150 mA load ► Initial output voltage accuracy: ±1% ► Up to 14 fixed output voltage options: 1.8 V to 3.3 V ► PSRR performance of 70 dB at 10 kHz ► Current limit

MAX3378EETD+ is a Analog Devices aluminum electrolytic capacitor for power filtering, decoupling, timing, and energy-storage sections of electronic assemblies. Key details include 14 pins, Small Outline No-lead, and -40°C to 85°C. Available through FindMyChip sourcing with worldwide shipping support.

Power Management Specialised - PMIC Low Loss PowerPath Controller

LTM8024EY#PBF is a Analog Devices capacitor for power filtering, decoupling, timing, and energy-storage sections of electronic assemblies. Key details include 88 pins, BGA, and -40°C to 125°C. Available through FindMyChip sourcing with worldwide shipping support.

RF Detector Next Gen Mobile Term Log Det

36V, 2A SYNCHRONOUS BUCK-BOOST C

Switching Voltage Regulators 60V PolyPhase Synchronous Boost Controller

MAX9939AUB/V+ is a Analog Devices capacitor for power filtering, decoupling, timing, and energy-storage sections of electronic assemblies. Key details include 10 pins, Small Outline Packages, and -40°C to 125°C. Available through FindMyChip sourcing with worldwide shipping support.

Analog Devices MAX20076ATCA/V+ is a 36 V input, dual-output mini buck converter delivering 600 mA and 1.2 A outputs with current-mode PWM control in a compact 12-pin 3×3 mm LFCSP package. It supports input voltages from 3.5 V to 36 V with a nominal 14 V operating range. Available from authorized distributors with worldwide shipping.

Analog Devices MAX274ACWI is a continuous-time, 8th-order active lowpass filter IC with a 150kHz cutoff frequency housed in a 28-pin SOIC package. Requires no external capacitors for filter pole definition, offering accurate and tunable Butterworth or Chebyshev responses. Available from stock worldwide with competitive pricing.

Analog to Digital Converters - ADC