Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
11,416
Total Products
25
Categories
All Analog Devices Components
Showing 6,501–6,550 of 11,416
Operational Amplifier
Digital Rheostat
Analog Devices AD5750BCPZ-REEL is an industrial current and voltage output driver IC with programmable output ranges, transient and overcurrent built-in protections, in a 32-lead LFCSP package. It supports both source and sink output current configurations for flexible 4-20 mA and voltage loop interfaces. Available from stock worldwide with fast shipping.
Analog Devices AD8617ACPZ-RL is a precision CMOS rail-to-rail output operational amplifier with 1.5 MHz gain-bandwidth product and sub-1 µA bias current. It features low offset voltage and high CMRR in an 8-pin LFCSP package. Suitable for portable instrumentation and sensor signal conditioning.
Low Power, Wide Supply Range, Low Cost Unity-Gain Difference Amplifiers
Op Amps
Analog Devices AD7512DIKNZ is a single-channel SPDT analog switch IC in a 14-pin DIP package with overvoltage protection. It operates from ±15 V dual supplies and features a low on-state resistance match of 0.75 Ω, making it suitable for precision signal routing in audio, industrial instrumentation, and data acquisition systems requiring low-distortion analog switching.
AD8227BRZ-RL is a precision instrumentation amplifier from Analog Devices featuring rail-to-rail output, 110 dB minimum CMRR, 100 µV maximum input offset voltage, and wide supply range. In an 8-pin SOIC package on tape-and-reel, it suits medical, industrial sensor, and bridge measurement applications.
IF Diversity Receiver
Precision CMOS, Single-Supply, Rail-to-Rail, Input/Output Wideband Operational Amplifiers
Quadrature Modulator
Low Power, Wide Supply Range,Low Cost Difference Amplifiers, G = ½, 2
Low Power, Low Noise, Low Bias Current, Precision Dual RRO Op Amp
AD8505ARJZ-RL is a Analog Devices integrated circuit for electronic designs. Key specs include 5 pins, SOIC, and datasheet-backed parameters. From inquiry quote with in stock worldwide shipping support.
Input/Output Wideband Operational Amplifiers
Operational Amplifiers
JFET Operational Amplifiers
Operational Amplifiers
Input/Output Wideband Operational Amplifiers
Input/Output Wideband Operational Amplifiers
Low Power, Wide Supply Range,Low Cost Difference Amplifiers, G = ½, 2
Precision Thermocouple Amplifiers with Cold Junction Compensation
Wide Bandwidth JFET Operational Amplifiers
FET-Input Op Amp
Low Power, Wide Supply Range, Low Cost Difference Amplifiers, G = ½, 2
16 MHz CBFET Op Amp
Low Cost Difference Amplifiers
Analog Devices AD8432ACPZ-RL is a dual-channel ultralow noise operational amplifier with low-offset architecture and 6250 µV maximum input offset voltage in a 24-pin QFN package. It suits high-sensitivity signal acquisition, medical imaging, and instrumentation front-end designs.
1-/2-/4-Channel Digital Potentiometers
1-/2-/4-Channel Digital Potentiometers
4-Channel Digital Potentiometers
Differential Input,Dual,Simultaneous Sampling, 4.25 MSPS, 14-Bit, SAR ADC
High Precision Limiting-Logarithmic Amplifier
Low Power, Wide Supply Range, Low Cost Unity-Gain Difference Amplifiers
Low Power, Wide Supply Range, Low Cost Unity-Gain Difference Amplifiers
Low Power, Wide Supply Range, Low Cost Unity-Gain Difference Amplifiers
Low power, single nanoDACs AD5660: 16 bits AD5640: 14 bits AD5620: 12 bits 12-bit accuracy guaranteed On-chip, 1.25 V/2.5 V, 5 ppm/°C reference Tiny 8-lead SOT-23, MSOP, and LFCSP packages Power-down to 480 nA @ 5 V, 200 nA @ 3 V 3 V/5 V single power supply Guaranteed 16-bit monotonic by design Power-on reset to zero/midscale 3 power-down functions Serial interface with Schmitt-triggered inputs Rail-to-rail operation SYNC interrupt facility
Wide Supply Range, Rail-to-Rail Output Instrumentation Amplifier
Low Power, Wide Supply Range, Low Cost Difference Amplifiers, G = ½, 2
Low Power, Wide Supply Range, Low Cost Unity-Gain Difference Amplifiers
The AD8278BRZ-RL is a low-power, wide-supply-range difference amplifier from Analog Devices with selectable gains of ½ and 2, featuring 86 dB minimum CMRR and 550 kHz bandwidth in an 8-pin SOIC package. Optimized for industrial signal conditioning and battery monitoring requiring accurate differential measurements at low cost.
Low Power, Wide Supply Range, Low Cost Difference Amplifiers, G = ½, 2
Low Power, Wide Supply Range, Low Cost Difference Amplifiers, G = ½, 2
Low Power, Wide Supply Range, Low Cost Difference Amplifiers, G = ½, 2
Low Power, Wide Supply Range, Low Cost Difference Amplifiers, G = ½, 2
AD8278ARZ-RL is a Analog Devices integrated circuit for PCB-level interconnects, replacement sourcing, or production BOMs. Key specs include 8 pins, -40°C to 85°C operating range, Small Outline Packages. From inquiry pricing, in stock sourcing, and.
Low Power, Wide Supply Range, Low Cost Unity-Gain Difference Amplifiers
1.2A Programmable Device Power Supply with Integrated 16-bit Level Setting DACs
Dual Buffer Mux/Demux
Programmable Gain Precision Difference Amplifier
Need Analog Devices Components?
Get competitive quotes from authorized China distributors
Request a Quote